Fuji Xerox Phaser 5500 Service Manual page 46

The diagram shows the paper path for Trays 1 through 5, the Duplex Unit, Exit 1, and
Exit 2.
Exit 2
Duplex Unit
A3L Rollers
Duplex
Roller
Pinch
Rollers
Feed Roller
Pinch Roller
Drive Roller
Pinch Rollers
Take Away Rollers
Tray 1/MPT
When feeding media from Tray 1/MPT, the control logic instructs the mechanical
drive to activate the Feed Roller. When the control logic calls for paper feed, it sends
a feed signal to momentarily energize the Tray 1/MPT Pick-up Solenoid causing the
Feed Roller to rotate. When the Feed Roller contacts the paper, a sheet is fed into the
gap between the Feed Roller and the Pinch Rollers.
2-6
Face Up Roller
Invert Roller
Retard Rollers
Exit Pinch Rollers
OCT Rollers
Pressure Roller
Tray 2
Tray 3
Tray 4
Tray 5
Feed Rollers
Phaser 5500 Printer Service Manual
Heat Roller
Transfer Roller
Drum
Registration
Pinch Roller
Registration Roller
Nudger Rollers
1000 Sheet Feeder
s5500-233