Exit 1 Offset Motor - Fuji Xerox Phaser 5500 Service Manual

Exit 1 Offset Motor

1.
Remove the Upper Rear Cover (page 8-15).
2.
Remove the Top Rear Cover (page 8-6).
3. Open Door A.
4. Remove the Exit 1 Top Cover (page 8-18).
5. Open the Front Door.
6.
Remove the Front Left Cover (page 8-5).
7. Remove the Exit Transport Assembly (page 8-78).
PL6.2.3
Offset Motor
8.
Disconnect the connector from the Offset Motor.
9.
Remove the two standard, Phillips-head screws securing the Offset Motor to the
Exit.
8-80
Connector
Clamps
Exit Transport
Assembly
Phaser 5500 Printer Service Manual
s5500-169