Replace Maintenance Kit; Invalid Or Missing Configuration Card - Fuji Xerox Phaser 5500 Service Manual

Replace Maintenance Kit

The Fuser Life Counter has reached its maximum count.
Replace Maintenance Kit Troubleshooting Reference
Applicable Parts
Fuser
Replace Maintenance Kit Troubleshooting Procedure
Step Actions and Questions
1 Warning:
1. Install a new Maintenance Kit.
2. Reset the Fuser Life counter (page 6-9).
Does the error still occur?

Invalid or Missing Configuration Card

The printer's Configuration Card is missing or defective. The printer operates as a
base model (non-networking) until a valid Configuration Card is detected.
Invalid or Missing Configuration Card Troubleshooting Reference
Applicable Parts
Configuration Card
I/P Board
Invalid or Missing Configuration Card Troubleshooting Procedure
Step Actions and Questions
1 Check the Configuration Card installation.
Remove and reinsert the Configuration
Card.
Does the error still occur?
3-250
Allow the Fuser to cool.
References
PL6.1 Fuser and Exit 1 Unit (page 9-34)
PL8.1 Print Engine Electrical (page 9-40)
Routine Maintenane Items (page 9-45)
Yes
Replace the
Engine Logic
Board
(page 8-89).
References
PL8.1 Print Engine Electrical (page 9-40)
Upgrade Kits and Options (page 9-45)
Yes
Replace the
Configuration Card.
If the problem
persists, replace the
I/P Board
(page 8-91).
Phaser 5500 Printer Service Manual
No
Problem solved.
No
Problem solved.