Uneven Density - Fuji Xerox Phaser 5500 Service Manual

Uneven Density

Image density varies across the page in either direction.
Initial Actions:
Load new, dry paper that meets specifications.
Check that the Toner Cartridge is properly installed and not empty.
Ensure that the printer is reasonably level.
Check to make sure the Laser path is clean and unobstructed.
Remove the Drum Cartridge and check for wear, contamination, or
obstructions.
Uneven Density Troubleshooting Reference
Applicable Parts
Drum Cartridge
Transfer Roller
Fuser
Uneven Density Troubleshooting Procedure
Step Actions and Questions
1 1. Install a new Drum Cartridge.
2. Print a test print.
Does the test print output image
contain uneven print?
5-42
Example Print
Yes
Go to Step 2.
Phaser 5500 Printer Service Manual
s5500-070
No
Problem solved.