Spots - Fuji Xerox Phaser 5500 Service Manual

Spots

Spots Troubleshooting Procedure
Actions and Questions
1. From the Main Menu, select Information, then press the
OK button.
2. Scroll to Information
3. Scroll to Configuration
4. Inspect the print for spots. Within a 289 X 95 mm square:
There should be no spots larger than or equal to
0.5 mm visible on the prints.
There should be no more than 1 spot measuring
between 0.4 mm and 0.5 mm visible on the print.
There should be no more than 16 spots measuring
between 0.25 mm and 0.4 mm visible on the print.
Any spot measuring less than 0.25 mm is
acceptable.
Are the prints free of spots or the spots that are visible
fall within the acceptable range?
Print-Quality Troubleshooting
Pages, then press the OK button.
Page, then press the OK button.
s5500-054
Yes
Go to "Light
(Undertoned)
Print" on
page 5-14.
No
Go to "Spots"
on page 5-29.
5-11