Spots - Fuji Xerox Phaser 5500 Service Manual

Spots

There are spots of toner randomly scattered on the page.
Initial Actions
Check that the paper is clean, dry, and meets specifications.
If using recycled paper, it may have spots.
Inspect the paper path for items, such as staples, paper clips, and paper
scraps.
Check the installation of the Drum Cartridge.
Check Drum surface for spots or contamination.
Check the Fuser for wear or contamination.
Check that the Drum Cartridge ground contacts are clean.
Spots Troubleshooting Reference
Applicable Parts
Drum Cartridge
Transfer Roller
Fuser
Image Processor Board
Engine Logic Board
Spots Troubleshooting Procedure
Step Actions and Questions
1 Check paper condition.
1. Load new, dry paper.
2. Print a Test Print.
Does the problem still occur?
2 Check the paper path.
Is the paper path clear?
Print-Quality Troubleshooting
Example Print
Yes
Go to Step 2.
Go to Step 3.
s5500-063
No
Problem solved.
Remove obstacles or
contamination.
5-29