Feed Roller Assembly - Fuji Xerox Phaser 5500 Service Manual

Feed Roller Assembly

1.
Remove the Tray 1/MPT Rear Cover (page 8-16).
2.
Remove the Tray 1/MPT Feeder (page 8-32).
PL3.2.20)
Pinch Chute
Hook
Pin
Pick Up Shaft
Lower Frame
3. Remove the two screws securing the Pinch Chute to the Tray 1/MPT Lower
Frame. Note the orientation of the roller and remove the Pinch Chute.
4. While releasing the two hooks of the Roller Core left and right securing the Feed
Roller to the Pick Up Shaft as shown in the figure, and slide the Feed Roller
outward.
5.
Remove the Feed Roller from the Pick Up Shaft by moving it in the direction of
the arrow (to the front).
8-38
Feed Roller
Hook
Roller Core
Phaser 5500 Printer Service Manual
Roller Core
s5500-133