Fuji Xerox Phaser 5500 Service Manual page 366

Black Print Troubleshooting Procedures (Continued)
3
Check the Customer's Print Job.
Is the Customer's Print Job blank?
4 Check the Drum Cartridge.
1. Install a new Drum Cartridge.
2. Run a Test Print.
Is the image density normal?
5 Check the HVPS.
1. Replace the HVPS (page 8-86).
2. Print a Test Print.
Is the Test Print normal?
6 Check the Engine Logic Board.
1. Replace the Engine Logic Board (page 8-89).
2. Print a Test Print.
Is the Test Print normal?
5-20
Verify printer
connections. If
the problem
persists, replace
the I/P Board
(page 8-91).
Problem solved.
Problem solved.
Problem solved.
Phaser 5500 Printer Service Manual
Go to Step 4.
Go to Step 5.
Go to Step 6.
Replace the I/P
Board
(page 8-91).