Rate-Police - Dell Z9500 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.6.1.0
6.1.1.1
Usage
To specify the name of the output QoS policy, use this command. After the output
Information
policy is specified, rate-shape, bandwidth-percentage, and WRED can be defined.
This command enables Qos-Policy-Output Configuration mode — (conf-qos-
policy-out).
Related
rate shape
Commands
bandwidth-percentage
wred

rate-police

Specify the policing functionality on incoming traffic.
Z9500
Syntax
rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-
rate [burst-KB]]
Parameters
kbps
committed-
rate
burst-KB
1460
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Policy name character limit increased from 16 to 32.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
— rate-shape traffic functionality.
— assigns weight to the class/queue percentage.
— assigns yellow or green drop precedence.
Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Make the following value a multiple of 64.
The range is from 0 to 40000000. The default granularity is
Megabits per second (Mbps).
Enter the bandwidth in Mbps. The range is from 0 to 40000.
(OPTIONAL) Enter the burst size in KB. The range is from 16
to 200000. The default is 100.
Quality of Service (QoS)