Test Cam-Usage - Dell Z9500 Reference Manual

Version
6.1.1.1
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop
wred_ge_y
wred_ge_g
wred_teng_y
wred_teng_g
WRED1

test cam-usage

Verify CAM usage for an input policy-map configuration.
Z9500
Syntax
test cam-usage service-policy input policy-map linecard {slot-
id port-set port-pipe| all}
Parameters
policy-map
linecard slot-id
port-set port-
pipe
linecard all
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
1476
Description
Introduced on the E-Series.
0 0
1024 2048
2048 4096
4096 8192
8192 16384
2000 7000
Enter the policy map name.
(OPTIONAL) Enter the slot number of a line card and a port-
pipe number to verify CAM usage on a specified set of ports.
Valid Z9500 slot IDs are 0 to 2. The range of valid port-pipe
numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and
2.
(OPTIONAL) Enter the keywords linecard all to verify
CAM usage on all line cards.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Quality of Service (QoS)