Show Qos Statistics - Dell Z9500 Reference Manual

Parameters
qos-policy-
name
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
6.1.1.1
Example
Dell#show qos qos-policy-output
Qos-policy-output qosOut

show qos statistics

View QoS statistics.
Z9500
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
wred-profile
interface
interface
Quality of Service (QoS)
Enter the QoS policy name.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
Enter the keywords wred-profile and optionally one of
the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40–Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Enter one of the following keywords and slot/port or number
information:
1473