Show Config; Show Spanning-Tree Rstp - Dell Z9500 Reference Manual

show config

View the current configuration for the mode. Only non-default values are displayed.
Z9500
Syntax
show config
Command CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell(conf-rstp)#show config
!
protocol spanning-tree rstp

show spanning-tree rstp

Display the RSTP configuration.
Z9500
Syntax
show spanning-tree rstp [brief] [guard]
Parameters
brief
guard
Rapid Spanning Tree Protocol (RSTP)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
bridge-priority 16384
(OPTIONAL) Enter the keyword brief to view a synopsis of
the RSTP configuration information.
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on an RSTP interface and the current port
state.
1541