Access-Class - Dell Z9500 Reference Manual

access-class

Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Z9500
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-
name
Defaults Not configured.
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
line
Commands
ip access-list standard
the IP address.
ip access-list extended
IP addresses or protocols.
Security
Enter the name of an established IP Standard ACL.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— applies an authentication method list to the designated terminal lines.
— names (or selects) a standard access list to filter based on
— names (or selects) an extended access list based on the
1569