Role - Dell Z9500 Reference Manual

role

Changes command permissions for roles.
Syntax role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
addrole
deleterole
role-name
reset
command
Defaults none
Command CONFIGURATION
Modes
Command
Version
History
9.5(0.0)
Security
Enter one of the following keywords as the mode for which
you are controlling access:
configure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
Enter the keyword addrole to add permission to the
command. You cannot add or delete rights for the sysadmin
role.
Enter the keyword deleterole to remove access to the
command. You cannot add or delete rights for the sysadmin
role.
Enter a text string for the name of the user role up to 63
characters. These are 3 system defined roles you can modify:
secadmin, netadmin, and netoperator.
Enter the keyword reset to reset all roles back to default for
that command.
Enter the command's keywords to assign the command to a
certain access level. You can enter one or more keywords.
Description
Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
1549