Ntp Master <Stratum; Ntp Server - Dell Z9500 Reference Manual

Version
8.3.19.0
8.3.11.1
8.4.1.0
8.3.7.0
6.1.1.0
ntp master <stratum>
Configure the switch as NTP Server.
Syntax
ntp master <stratum>
Parameters
ntp
master<stratum
>
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.6(0.0)

ntp server

Configure an NTP time-serving host.
Syntax
ntp server[vrf vrf-name] {hostname | ipv4-address | ipv6-
address} [key keyid] [prefer] [version number]
Parameters
vrf vrf-name
1744
Description
Introduced on the S4820T.
Introduced on the Z9000.
Added support for IPv6 multicast addresses.
Introduced on the S4810.
Introduced on the E-Series.
Enter the stratum number to identify the NTP Server's
hierarchy.
Description
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, Z9000,
and Z9500.
(Optional) Enter the keyword vrf and then the name of the
VRF to configure a NTP time-serving host corresponding to
that VRF.
System Time and Date