Ip Ssh Authentication-Retries - Dell Z9500 Reference Manual

Parameters
directory
Defaults The internal flash (flash:) is the default directory.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage To configure the switch as an SCP server, use the ip ssh server command.
Information
Related ip ssh server
Commands

ip ssh authentication-retries

Configure the maximum number of attempts that should be used to authenticate a user.
Z9500
Syntax
ip ssh authentication-retries 1-10
Parameters
1-10
Defaults 3
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1610
Enter a directory name.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enables the SSH and SCP server on the switch.
Enter the number of maximum retries to authenticate a user.
The range is from 1 to 10. The default is 3.
Security