Show Protocol-Tunnel - Dell Z9500 Reference Manual

Version
7.4.1.0
Example
Dell#
Dell#conf
Dell(conf)#protocol-tunnel rate-limit 1000
Dell(conf)#
Related

show protocol-tunnel

Commands
show running-config
show protocol-tunnel
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
Z9500
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Example
Dell#show protocol-tunnel
System Rate-Limit: 75 frames/second
VLAN
1642
Description
Introduced
— displays tunneling information for all VLANs.
— displays the current configuration.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display information for the one VLAN. The range is from 1 to
4094.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, E-Series and E-Series ExaScale.
Introduced
Protocols Interface
Service Provider Bridging