Redistribute Isis - Dell Z9500 Reference Manual

Version
6.2.1.1
Usage To redistribute the default route (0.0.0.0/0), configure the default-information
Information
originate command.
Related
default-information originate
Commands

redistribute isis

Redistribute routing information from an IS-IS instance.
Z9500
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value] [route-map map-name]
command.
Parameters
tag
level-1
level-1-2
level-2
metric metric-
value
route-map
map-name
Defaults Not configured.
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1508
Description
Introduced on the E-Series.
— generates a default route for RIP traffic.
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute
only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute
both IS-IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute
only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number as
the metric value. The range is from 0 to 16.
(OPTIONAL) Enter the keywords route-map then the name
of a configured route map.
Routing Information Protocol (RIP)