Dell Z9500 Reference Manual page 1628

vrf instance
ipv4 address
ipv6-address
prefix-length
-c encryption
cipher
-l username
-m HMAC
algorithm
-p port-
number
-v {1 | 2}
1628
(OPTIONAL) E-Series Only: Enter the keyword vrf then the
VRF Instance name to open an SSH connection to that
instance.
(OPTIONAL) Enter the IP address in dotted decimal format
A.B.C.D.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enable the "FIPS mode enable", this mode will support only
v2 client.
"no fips mode enable"(disable) will support v1 & v2 client.
This comment is applicable for both ciphers & HMAC
algorithms:
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
(OPTIONAL) Enter the keyword -l then the user name used
in this SSH session. The default is the user name of the user
associated with the terminal.
Enter one of the following HMAC algorithms to use. (For v2
clients only):
"no fips mode enable"(disable) will support v1 & v2 client.
•
hmac-sha1
•
hmac-sha1-96
•
hmac-md5
•
hmac-md5-96
•
hmac-sha2-256
•
hmac-sha2-256-96
(OPTIONAL) Enter the keyword -p then the port number.
The range is from 1 to 65535. The default is 22.
(OPTIONAL) Enter the keyword -v then the SSH version 1 or
2. The default is the version from the protocol negotiation.
Security