Show Snmp User - Dell Z9500 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Usage The following Example displays a group named ngroup. The ngroup has a security
Information model of version 3 (v3) with authentication (auth), the read and notify name is
nview with no write view name specified, and finally the row status is active.
Example
Dell#show snmp group
groupname: ngroup
readview : nview
notifyview: nview
row status: active
Dell#
Related snmp-server group
Commands

show snmp user

Display the information configured on each SNMP user name.
Z9500
Syntax
show snmp user
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
1660
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— configures an SNMP server group.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
security model: v3 auth
writeview: no write view specified
Simple Network Management Protocol (SNMP) and Syslog