Show Spanning-Tree 0 - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show spanning-tree 0

Display the spanning tree group configuration and status of interfaces in the spanning tree group.

show spanning-tree 0 [active | brief | guard | interface

interface | root | summary]

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Spanning Tree Protocol (STP)

Enter 0 (zero) to display information about that specific

spanning tree group.

(OPTIONAL) Enter the keyword active to display only active

interfaces in spanning tree group 0.

(OPTIONAL) Enter the keyword brief to display a synopsis

of the spanning tree group configuration information.

(OPTIONAL) Enter the keyword guard to display the type of

guard enabled on an STP interface and the current port state.

(OPTIONAL) Enter the keyword interface and the type

slot/port of the interface you want displayed. Type slot/port

options are the following:

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

(OPTIONAL) Enter the keyword root to display configuration

information on the spanning tree group root.

(OPTIONAL) Enter the keyword summary to only the number

of ports in the spanning tree group and their state.

Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.