Vdsl2 Line Profile Setup - ZyXEL Communications MSC1024G Series User Manual

Chapter 13 Profile Screens
Figure 210 Profile > VDSL2
The following table describes the labels in this screen.
Table 144 Profile > VDSL2
LABEL
Name
VDSL2 Line Profile
VDSL2 Channel
Profile
Rate Adaption Ratio
Channel 1
Apply
New
Cancel
Index
Name
VDSL2 Line Profile
VDSL2 Channel
Profile
Modify
Delete

13.7.1 VDSL2 Line Profile Setup

Click Profile > VDSL2 and click the LineProfile link to open the screen as shown next. Use
the screen to add, edit or delete a VDSL2 line profile.
334
DESCRIPTION
Enter a descriptive name to identify this template.
Select a line profile for this VDSL2 template. You can configure line profiles by
clicking the LineProfile link in the right-top corner of the screen.
Select a channel profile for this VDSL2 template. You can configure channel
profiles by clicking the ChanProfile link in the right-top corner of the screen.
This field displays the transmission rate distribution ratio between upstream and
downstream traffic for channel 1 in this template.
Click Apply to save the changes in this screen to the system's volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
The new or modified VDSL2 template then displays in the summary table below.
While you are modifying a profile, you can click New to start configuring a fresh
profile without saving your changes.
Click Cancel to start configuring the screen again.
This is the number of a VDSL2 template.
This field displays the descriptive name for each configured VDSL2 template.
This field displays the line profile name configured in each VDSL2 template.
This field displays the channel profile name configured in each VDSL2 template.
Select a profile's Select radio button and click Modify to edit the profile.
Select a profile's Select radio button and click Delete to remove the profile.
MSC1000G/1024G/1224G Series User's Guide