Xvlan Setup - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Figure 194 xVLAN Example

11.31.1 xVLAN Setup

Click Port > Xvlan in the navigation panel to open the Xvlan Setup screen. Use this screen to

configure xVLAN settings for individual ports.

Figure 195 Port > Xvlan

The following table describes the fields in this screen.

Table 131 Port > Xvlan

MSC1000G/1024G/1224G Series User's Guide

Select the number of a line card's slot. The corresponding subscriber port setup

screen for the type of line card you selected automatically displays.

Select the number of a DSL port on the line card.

Click Load to display the port's settings in the fields below.

This is the number of an xVLAN entry on this port.

This is the original customer VLAN ID. When the port receives traffic from the

subscriber with this VID, it applies this xVLAN entry's settings before forwarding it

to the service provider's network.

Chapter 11 Subscriber Port Setup Screens

Msc1224g series Msc1000g series