Ima Mgtpvc Commands - ZyXEL Communications MSC1024G Series User Manual

Chapter 27 ima Commands
The following example shows the settings of IMA group 2 on slot 2.
ras> ima group show 2-2
slot
group
state
frame size
frame sync alpha
frame sync beta
frame sync gamma
clock mode
group symmetry
max differential delay
minimum link number
link id in group

27.4 ima mgtpvc Commands

Syntax:
ima mgtpvc set <slot-group-vpi/vci> <profile> <llc|vcmux> <pvid> <priority>
This command sets a bridged management PVC which provides an in-band management
channel between the MSC line card and a remote IES through an IMA connection.
The following example shows how to map management frames with a PVC on IMA group 2
of slot 2 using the following settings:
• Management frames: tagged with VLAN ID 100 and priority 7
• The name of an ATM profile applied to this PVC: DEFVAL
• PVC: 0/33 and using the llc encapsulation method
ras> ima mgtpvc set 2-2-0/33 DEFVAL llc 100 7
Syntax:
ima mgtpvc set <slot-group-vpi/vci> <profile> <llc|vcmux> <ip-address>
<gateway-ip> <pvid> <priority>
This command sets a routed management PVC (see
In the following example (same as
management computer (M) are located in the central office site (CO). The inband
management IP addresses of IMA-1 is 192.168.1.1 and M's IP address is 192.168.1.3. IMA-2
is the remote IMA device which uses 192.168.1.2 for its inband manage IP address in the
remote site (RT).
652
: 2
: 2
: enable
: 128
: 2
: 5
: 5
: ctc loop
: symop
: 100
: 2
: 1,2,6
Section 12.7 on page
Figure 205 on page 320), the IES (IMA-1) and the
MSC1000G/1024G/1224G Series User's Guide
319).