C
H A P T E R
Use this section to save changes to your system's configuration.
19.1 The Config Save Screen
Use this screen to save all configuration changes on to your MSC's flash memory. If you do
not use this screen, any changes you have made to the system's configuration will be lost once
the MSC is shut down.
Figure 393 Config Save
The following table describes the labels in this screen.
Table 303 Config Save
LABEL
Save
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click Save to save your changes to non-volatile memory when you are done
configuring. Otherwise system configuration changes will be lost if the MSC is turned
off or loses power.
19
Config Save
573