Figure 35 Enable the IMA Group Example
7 Check the link status.
Click Statistics > IMA, ID 2 (slot 2), port 3, group 2.
In the Group Detail screen, you should see the values of the Ne State and Fe State
fields are both operational.
8 Create PVC, DTPVC, and/or MGTPVC settings for the IMA group.
Depending on your applications, you may need to configure PVC, DTPVC and/or
MGTPVC settings. See the corresponding screen description in this User's Guide if you
are not sure about them.
This tutorial shows examples for the configuration on these screens.
8a Click IMA > PVC.
8b Select Slot 2 and Group 2, then click Load.
8c Create a PVC using VPI/VCI 0/33, PVID/Priority 10/0, Profile DEFVAL, MUX llc
and untag for the settings. Then click Apply.
Figure 36 Creating a PVC Example
MSC1000G/1024G/1224G Series User's Guide
Chapter 4 Tutorials
87