ZyXEL Communications MSC1024G Series User Manual page 692

Chapter 31 port Commands
Table 325 port Commands (continued)
COMMAND
gbond delete
set
show
h248 set
termination
ipbpvc arpproxy
delete
domain
692
<slot> <bond_name>
set <slot>
<bond_name>
<portlist>
<slot>
[<bond_name>]
<slot-port>
<dsp_profile>
<slot-port> <name>
[<step>]
flush all
|edgerouter [<ip-
address> <vid>]
|interface [<ip/
mask> <vid>]
age set <sec>
show
<slot-port-vpi/
vci>
delete <domain-
name>
dhcpvlan disable
<domain name>
dhcpvlan enable
<domain name> <vid>
set <domain name>
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Removes G.bond settings from the DSL
lines specified in the G.bond group.
bond_name: The name of a DSL line
group with G.bond configured on them.
Configures a G.bond group or modifies the
membership of a G.bond group.
portlist: A list of ports, for example,
(1,2), (5~7).
Note: G. bond on ADSL (ALC line
cards) lines only supports
pairs of consecutive ports (1,
2), (3, 4) and so on up to
(47, 48).
Note: G. bond on SHDSL lines (for
example, the SLC1248G line
card) supports multiple ports
in any combination.
Shows G.bond settings on the specified
port.
Sets which DSP (Digital Sound
Processing) profile the specified H.248
ports use.
Sets termination names for H.248 ports.
Manually flushes the learned MAC
addresses from the ARP table.
Sets the valid time interval for learned
MAC addresses in the ARP table
(10~10000 seconds)
Displays the number of seconds a learned
MAC address remains valid in the ARP
table.
Removes the specified IP aware Bridge
PVC.
Removes the specified domain. First
delete all VLANs belonging to this domain.
Disables DHCP VLAN in a domain.
Enables DHCP VLAN in a domain.
Creates a domain with maximum 8
domains in the system.
P
M
M
L
M
M
M
M
M
M
M
M
M
M