ZyXEL Communications MSC1024G Series User Manual page 414

Chapter 14 Statistics Screens
Figure 276 Port Statistics: DSL Line Card
The following table describes the labels in this screen.
Table 189 Port Statistics: DSL Line Card
LABEL
Port
Link
Config Rate
Payload Rate
Error
Rx kbps
Tx kbps
Uptime
Poll Interval(s)
Stop
14.11.4.1 DSL Line Card Packet Counter
To display the packet counters of a port on a line card, click the port number in the line card's
statistics screen (see
414
DESCRIPTION
This field displays the port number.
This field displays the port link status.
On an SHDSL port, this field displays the wire pair setting when the port is up.
This field displays the configured upstream and downstream rates.
This field displays the actual upstream and downstream rates.
This field displays the number of errors that have occurred on the port.
This field displays the receiving rate in kilo bits per second (kbps).
This field displays the transmission rate in kilo bits per second (kbps).
This field displays how long the connection is up.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to stop port statistic polling.
Figure 276 on page 414).
MSC1000G/1024G/1224G Series User's Guide