ZyXEL Communications MSC1024G Series User Manual page 809

<regsvr-port>
<proxysvr-
port>
uritype SIP
uritype TEL
<pbit>
<dscp>
keepalive
<se>
prack
This command creates and configures a SIP profile. The values of the default SIP profile
"DEFVAL" are as follows:
• SIP server domain name: 0.0.0.0
• SIP registrar server domain name: 0.0.0.0
• SIP proxy server domain name: 0.0.0.0
• SIP server port number: 5060
• SIP registrar server port number: 5060
• SIP proxy server port number: 5060
• URI type: SIP
• IEEE 802.1p tag: 7
• DSCP tag: 48
• Keep alive: off
• PRACK: off
The following example shows a command configuring a SIP profile named "sip10" with the
following settings:
• SIP server domain name: host1.domain1
• SIP registrar server domain name: host2.domain2
• SIP proxy server domain name: host3.domain3
• SIP server port number: 5061
• SIP registrar server port number: 5062
• SIP proxy server port number: 5063
• URI type: SIP
• IEEE 802.1p tag: 5
• DSCP tag: 36
• Keep alive: on
• SE: 1000
MSC1000G/1024G/1224G Series User's Guide
= The registrar server port number (1025 ~ 65535).
= The SIP proxy server port number (1025 ~ 65535).
The profile uses SIP URI.
=
= The profile uses TEL URI.
= The IEEE 802.1p priority tag for SIP and RTP packets (0 ~ 7).
The DiffServ Code Point for SIP and RTP packets (0 ~ 63).
=
Turn SIP session keepalive off or on. When this is on, the SIP UA
=
periodically sends SIP session refresh requests.
The minimum session expiration time in seconds (90 ~ 65535)
=
= The PRovisional ACKnowledgement response sent in reply to a SIP
INVITE request. PRACK support can be activated (prack on) or
deactivated (prack off).
Chapter 32 profile Commands
809