Chapter 11 Subscriber Port Setup Screens
Table 98 SHDSL Port Setup (continued)
LABEL
State
Card Type
Up Time
Firmware
11.10.1 SHDSL Port Setup Line Card Screen
Click Port > SHDSL in the navigation panel to open the SHDSL Port Setup screen. Click the
slot number of an active SHDSL line card to open the following screen. Use this screen to
configure settings for individual SHDSL ports and copy settings between ports.
Figure 150 SHDSL Port Setup: Line Card
248
DESCRIPTION
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could
be due to the card starting, a firmware upgrade in progress or a malfunction. See
Section 39.7 on page 974
for what to do if the line card stays stuck in the inactive
state.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it
was started.
This field displays the current firmware version installed on the line card.
MSC1000G/1024G/1224G Series User's Guide