Acl Dhcprelay82 Relaymode Command; Acl Dhcprelay82 Server Active Command; Acl Dhcprelay82 Server Delete Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 21 acl Commands
The following example sets the DHCP relay feature on VLAN 10 to use TR-101 encoding,
and to transmit the VLAN ID.
ras> acl dhcprelay82 optionmode 10 tr101 vid on

21.3.5 acl dhcprelay82 relaymode Command

Syntax:
acl dhcprelay82 relaymode <mode>
where
<mode>
This command sets the DHCP relay mode on the system.

21.3.6 acl dhcprelay82 server active Command

Syntax:
acl dhcprelay82 server active <vid> <active-server>
where
<active-server>
This command specifies the DHCP server to which client DHCP requests are sent first. If you
have also configured a second DHCP server, the non-active DHCP server will be the backup
DHCP server. This function is applicable when you have configured two DHCP server settings
for the VLAN.
The following example sets the system to forward client DHCP requests in VLAN 3 to the
second DHCP server first.
ras> acl dhcprelay82 server active 3 2

21.3.7 acl dhcprelay82 server delete Command

Syntax:
acl dhcprelay82 server delete <vid> [serverip]
592
The system sends the requests to the active DHCP server first. If the
= auto
active DHCP server does not respond, the switch sends the DHCP request to
the backup DHCP server.
both The system sends the requests to both the active and backup DHCP
servers.
= 1: Sets the first DHCP server as the active DHCP server. The system
sends DHCP requests in the specified VLAN to the first DHCP server
first.
2: Sets the second DHCP server as the active DHCP server. The
system sends DHCP requests in the specified VLAN to the second
DHCP server first.
MSC1000G/1024G/1224G Series User's Guide