Port Ppvc Show Command; Port Ppvc Vlan Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 31 port Commands
The following example creates a PPVC with VPI 8 and VCI 35 for port 5 on the line card in
slot 7. The PPVC uses llc encapsulation and default VID 25. Any frames received without an
IEEE 802.1p priority tag will be assigned a priority of 3.
ras> port ppvc set 7-5-8/35 llc 25 3

31.26.5 port ppvc show Command

Syntax:
port ppvc show <slot>|<slot-port>|<slot-port-vpi/vci> [detail]
where
<slot-port-vpi/
vci>
<vid>
[detail]
This command displays the runtime configured PPVCs.
The following example displays the PPVCs configured on the port 5 on the line card in slot 7.
It also displays VLAN information.
ras> port ppvc show 7-5-8/35 detail
pvc
-------------- ------ ----- ------ ---- --------------------------------
7-5-8/35
member:
vpi/vci
--------- ----- --------------------------------
8/36
vlans:
idx vlanid
--- -------- -------- --------
1
2

31.26.6 port ppvc vlan Command

Syntax:
port ppvc vlan <slot-port-vpi/vci> <vid> <registration> <tag>
734
= The slot and port(s) and VPI/VCI of the PPVC.
= The VLAN ID. Valid parameter range = [1 – 4094].
This must be the VLAN ID of a VLAN that is already configured. The
ports specified in this command must also be set to the fixed status in
the VLAN.
= Display the PPVC's VLAN configuration in addition to the other PPVC
settings.
type mux pvid
prio llc
level profile
2 DEFVAL
adv untag
25 fix untag
28 fix untag
pri profile
25 3
MSC1000G/1024G/1224G Series User's Guide