ZyXEL Communications MSC1024G Series User Manual page 187

Table 65 IMA Loopback (continued)
LABEL
F5 end2end
F5 segment
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Select this to perform an ATM F5 end to end loopback test.
Group: Select the number of an IMA group.
VPI/VCI: Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) of a
channel in this group.
Select this to perform an ATM F5 segment loopback test.
A segment ID identifies an ATM device. Use this loopback test to only have the device
with the specified segment ID return the F5 loopback testing cells.
Group: Select the number of an IMA group.
VPI/VCI: Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) of a
channel in this group.
segment ID: Specify a 16-byte segment ID for this loopback test. For example,
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.
Chapter 8 Diagnostic Screens
187