Figure 214 Profile > VDSL2 > LineProfile > DPBO
The following table describes the labels in this screen.
Table 148 Profile > VDSL2 > LineProfile > DPBO
LABEL
DPBOESEL
DPBOESCMA,
DPBOESCMB,
DPBOESCMC
DPBOMUS
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Specify the electrical length of the cable between the system and CPE devices.
See
Section 11.2.9 on page
These parameters define a cable model that is used to describe the frequency
dependent loss of exchange-side cables.
This defines the assumed minimum usable received PSD mask (in dBm/Hz) for
exchange based services, used to modify parameter DPBOFMAX defined
below. Enter from 0 to 255 to set the PSD to 0~-127.5 dBm/Hz in steps of -0.5
dBm.
Chapter 13 Profile Screens
212.
341