Alarm Port Setup Slot Screen - ZyXEL Communications MSC1024G Series User Manual

Table 44 Alarm Port Setup (continued)
LABEL
State
Card Type
Up Time
Firmware

6.3.1 Alarm Port Setup Slot Screen

Click the slot number of a line card in the Alarm Port Setup screen to display the screen
shown next.
Figure 82 Alarm Port Setup: Slot
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could
be due to the card starting, a firmware upgrade in progress or a malfunction. See
Section 39.7 on page 974 for what to do if the line card stays stuck in the inactive
state.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it was
started.
This field displays the current firmware version installed on the line card.
Chapter 6 Alarm Screens
147