Dtpvc Mvlan Disable Command; Dtpvc Mvlan Enable Command; Dtpvc Set Command - ZyXEL Communications MSC1024G Series User Manual

31.7.2 dtpvc mvlan disable command

Syntax:
port dtpvc mvlan disable <slot-port-vpi/vci>
This command turns off MVLAN for the specified DTPVC. The following example turns off
MVLAN on DTPVC 8/35 on port 1 on the line card in slot 3.
ras> port dtpvc mvlan disable 5-1-8/35

31.7.3 dtpvc mvlan enable command

Syntax:
port dtpvc mvlan enable <slot-port-vpi/vci>
This command turns on MVLAN for the specified DTPVC. The following example turns on
MVLAN on DTPVC 8/35 on port 1 on the line card in slot 3.
ras> port dtpvc mvlan enable 5-1-8/35

31.7.4 dtpvc set command

Syntax:
port dtpvc set <slot-port-vpi/vci> <profile> <mux> <svid> <spri> <cvid>
<cpri>
where
<profile>
<mux>
<svid>
<spri>
<cvid>
<cpri>
This command configures a DTPVC on the specified subscriber port. The following example
creates DTPVC 8/35 on port 1 on the line card in slot 5. It uses the DEFVAL profile, LLC
encapsulation, a service provider VLAN ID of 2, an IEEE priority level of 3 for the service
provider VLAN tag, a customer VLAN ID of 10, and an IEEE priority level of 6 for the
customer VLAN tag,
ras> port dtpvc set 5-1-8/35 DEFVAL llc 2 3 10 6
MSC1000G/1024G/1224G Series User's Guide
= Name of an ATM profile.
= Encapsulation method (llc or vcmux).
SVID refers to the service provider's VLAN ID (the outer VLAN tag). Enter
=
the service provider ID (from 1 to 4094) for untagged frames received on
this DTPVC.
= Enter the priority level for the service provider's VLAN ID. "0" is the lowest
priority level and "7" is the highest.
= CVID refers to the customer VLAN ID (the inner VLAN tag). Enter the
customer ID (from 1 to 4094) for untagged frames received on this
DTPVC.
Enter the priority level for the customer VLAN ID. "0" is the lowest priority
=
level and "7" is the highest.
Chapter 31 port Commands
709