Port Paepvc Set Command; Port Paepvc Show Command; Port Pots Gain Command - ZyXEL Communications MSC1024G Series User Manual

31.24.2 port paepvc set Command

Syntax:
port paepvc set <slot-port-vpi/vci> <profile> <mux> <pvid> <priority> [acname
<acname>] [srvcname <srvcname>] [hellotime <hellotime>]
where
<profile>
<mux>
<acname>
<srvname>
This command creates a PPPoA-to-PPPoE PVC to allow communication between the ATM
(CPE) and Ethernet network (BRAS) segments. The PVC is mapped to a PPPoE session that
connects to the specified BRAS.
The following example creates a PPPoA-to-PPPoE PVC (
slot . The PVC uses
3
This configuration is for the
until the
hello time
ras> port paepvc set 3-1-1/33 DEFVAL llc 2 1 acname vom srvcname video
hellotime 10

31.24.3 port paepvc show Command

Syntax:
port paepvc show <slot>|<slot-port>|<slot-port-vpi/vci>
This command displays the PPPoA-to-PPPoE PVC settings for the specified port and/or slot.
The following example displays the settings on the line card in slot 3.
ras> port paepvc show 3
pvc
-------------- ------- ----- ------ ---- ----- --------------------------
3-1-1/33
ras>

31.25 port pots gain Command

Syntax:
port pots gain <slot-port> <tx-gain> <rx-gain>
MSC1000G/1024G/1224G Series User's Guide
Name of an ATM profile.
=
Encapsulation method (llc or vcmux).
=
= This field is optional. Specify the hostname of a remote access
concentrator if there are two access concentrators (or BRAS) on the
network or that you want to allow PAE translation to the specified access
concentrator.
= This field is optional. Specify the name of the service that uses this PVC.
This must be a service name that you configure on the remote access
concentrator.
encapsulation and the
llc
service on the
video
timeout before terminating the PPPoE session.
type mux pvid
pae llc 2
Chapter 31 port Commands
) for port
1/33
ATM profile with a priority of
DEFVAL
access concentrator. The switch waits
vom
pri htime profile/acname/srvcname
1 10 DEFVAL/test/example
on the line card in
1
.
1
731