Alarm Screens; Chapter 6 Alarm Screens; Current Alarm Screen - ZyXEL Communications MSC1024G Series User Manual

C
H A P T E R
This chapter describes alarm management.

6.1 Current Alarm Screen

Click Alarm > Current Alarm to display the screen where you can view all current alarms.
You can also click a tab to view the alarms only specific to one severity level.
Figure 79 Current Alarm: All
The following table describes the labels in this screen.
Table 42 Current Alarm: All
LABEL
UP
Show All
Show Alarm
From To (YYYY/
MM/DD)
Apply
No
Alarm
Condition
Severity
Timestamp
Source
Previous 10
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click UP to go to the System Info screen.
Select the radio button to display all alarms.
Select the radio button and specify a range of time in the year/month/day format to
display the alarms occur during this period only.
Click Apply to display the alarms (either all or from the time range you selected).
This is the index number of the alarm.
This is the alarm category.
This is the alarm condition.
This is the severity level of alarms.
This is the time when the alarm occurred.
This is the location where the alarm occurred.
Click Previous 10 to show the preceding 10 pages of information.

Alarm Screens

6
143