Configuration Reset Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 9 Maintenance Screens
Figure 103 Configuration Restore
Type the path and file name of the configuration file you wish to restore in the File Path text
box or click Browse to display a Choose File screen from which you can locate it. After you
have specified the file, click Restore. "conf-0" is the name of the configuration file on the
system, so your backup configuration file is automatically renamed when you restore using
this screen.

9.3 Configuration Reset Screen

Click Maintenance > Config Reset in the navigation panel to open the following screen. Use
this screen to clear all system configuration information that you have configured and return to
the factory defaults.
Figure 104 Configuration Reset
Click Reset to return the system to the factory default settings.
Figure 105 Confirm Restore Factory Default Settings
Click OK to begin resetting all system configurations to the factory defaults and then wait for
the system to restart. This takes up to two minutes. If you want to access the web configurator
again, you may need to change the IP address of your computer to be in the same subnet as
that of the default system IP address (192.168.1.1 for in-band, 192.168.0.1 for out-of-band).
190
MSC1000G/1024G/1224G Series User's Guide