Pnac Slot Screen - ZyXEL Communications MSC1024G Series User Manual

Table 27 802.1X PNAC: Port Setup (continued)
LABEL
Copy
ID
State
Card Type
Up Time
Firmware
5.12.1 802.1X PNAC Slot Screen
Click the slot number of an active line card in the Port Setup screen to display the screen
shown next.
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Do the following to copy the settings you configure above to another port or ports.
1. Click Copy.
2. Select to which line card you want to copy the settings.
3. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
4. Click Apply to paste the settings.
This is the slot number of a line card. Click the index number of an active line card
to display the 802.1X PNAC Slot screen where you can view and copy settings
from one port to another port or ports on the selected line card.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could
be due to the card starting, a firmware upgrade in progress or a malfunction. See
Section 39.7 on page 974 for what to do if the line card stays stuck in the inactive
state.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it was
started.
This field displays the current firmware version installed on the line card.
Chapter 5 Access Control List Screens
121