Chapter 30 multicast Commands
Table 323 multicast Commands (continued)
COMMAND
30.2 multicast bandwidth Commands
Use these commands to configure bandwidth requirements for multicast channels.
30.2.1 multicast bandwidth default Command
Syntax:
multicast bandwidth default <bandwidth>
where
<bandwidth>
This command sets the default bandwidth for multicast channels for which you have not
configured bandwidth requirements yet. Multicast bandwidth settings on channels (using the
multicast bandwidth set
The following example sets the default multicast bandwidth to 1000 kbps.
ras> multicast bandwidth default 1000
30.2.2 multicast bandwidth delete Command
Syntax:
multicast bandwidth delete <index>
This command removes the specified multicast bandwidth configuration profile.
30.2.3 multicast bandwidth set Command
Syntax:
multicast bandwidth set <index> <start-mcast-ip> <end-mcast-ip> <bandwidth>
672
set
<vid> <group-
ip>
all|sub1|sub2|u
p1|up2|<slot-
port>
fix|forbid|norm
al
show
Allowed bandwidth between 1 and 1000 000 kbps (kilo bits per second).
=
command) have higher priority over this default setting.
DESCRIPTION
Configures a static multicast group
entry.
Displays the static multicast group
configuration.
MSC1000G/1024G/1224G Series User's Guide
P
M
L