ZyXEL Communications MSC1024G Series User Manual page 298

Chapter 11 Subscriber Port Setup Screens
Figure 189 DTPVC Setup
The following table describes the fields in this screen.
Table 126 DTPVC Setup
LABEL
DTPVC
Table
Slot
Port
Load
Index
VPI / VCI
Profile
MUX
Type
SVID
SPri
298
DESCRIPTION
This table displays the DTPVCs that are configured for the selected port.
Select the number of a line card's slot. The corresponding subscriber port setup screen
for the type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Click Load to display the port's DTPVC settings in the DTPVC Table.
This is the number of the DTPVC on this port.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The
VPI and VCI identify a channel on this port.
This field displays the ATM profile that this channel uses.
This field displays the encapsulation type (llc or vc) for this channel.
This field shows that the channel is a DTPVC.
This is the service provider's VLAN ID (the outer VLAN tag) that the line card assigns to
untagged frames received on this DTPVC.
This field displays the IEEE 802.1p priority level for the service provider tag that the line
card adds to untagged frames that come in on this DTPVC. "0" is the lowest priority
level and "7" is the highest.
MSC1000G/1024G/1224G Series User's Guide