ZyXEL Communications MSC1024G Series User Manual page 768

Chapter 32 profile Commands
Table 327 profile Commands (continued)
COMMAND
768
DESCRIPTION
Continued:
callhold: Allows (on) or prohibits
(off) call holding.
callwait: Allows (on) or prohibits
(off) call waiting.
callreturn: Call return allowed/
prohibited.
cidcw: Calling Identity Delivery on
Call Waiting allowed/prohibited.
clip: Allows (on) or prohibits (off)
caller ID presentation.
clir: Allows (on) or prohibits (off)
caller ID restriction.
calltransfer: Allows (on) or
prohibits (off) call transferring.
g711: Sets the system to relay fax
signals via ITU-T G.711.
t38: Sets the system to relay fax
signals via ITU-T T.38.
flash: Select the method the system
uses to process the flash signal from a
user.
invite: relays flash by SIP INVITE
signal.
rfc2833: relays flash according to
RFC 2833.
rfc2833like: relays flash in SIP
INFO packets, but carried as RFC
2833 payload
sipinfo1: relays flash in SIP INFO
packets (a signal=16 message)
sipinfo2: relays flash in SIP INFO
packets (a signal=hf message)
sipinfo3: relays flash in SIP INFO
packets (a signal=hook-flash
message)
sipinfo4: relays flash in SIP INFO
packets (a plain text "FLASH"
message).
sipinfo5: relays flash in SIP INFO
packets (multiple SIP messages). The
message content is determined by the
characters you enter for <rc>. A
separate SIP INFO message is sent for
each character you enter.
sipinfo6: relays flash in SIP INFO
packets (where the content of the
message is determined by the text you
enter for <si>).
localcall: Sets whether or not to
allow subscribers to call other
subscribers if the system's connection
to the SIP server is not available.
MSC1000G/1024G/1224G Series User's Guide
P