Table of Contents
Advertisement
C
H A P T E R
This chapter shows you how to use the
33.1 show Commands Overview
The
commands display runtime status information.
show
33.2
Commands Summary
show
The following table lists the
administrator privilege level needed to use the command (H for high, M for middle or L for
low).
Table 328 show Commands
COMMAND
show
adsl
arp
atm
cfm
MSC1000G/1024G/1224G Series User's Guide
show Commands
show
commands. The P column on the right indicates the
show
linedata
<slot-port>
linegain
<slot-port>
linehlog
lineqln
linetssi
<slot-
port>|<slot-
port-vpi/vci>
[reset]
mep
commands.
DESCRIPTION
Displays an ADSL port's line bit
allocation.
Displays the ADSL line gain.
Displays ADSL line channel
characteristics. The format provides
magnitude values in a logarithmic
scale.
This command displays the Quiet Line
Noise level on a line. This is the rms
(root mean square) level of the noise
present on the line for a DMT tone
when no ADSL or VDSL signals are
present. It is measured in dBm/Hz.
The QLN can be used in analyzing
crosstalk.
Displays the ADSL line's upstream and
downstream linear TSSI (transmitter
spectrum shaping) parameters.
Displays the ARP table.
Displays ATM traffic counters.
Displays all MEPs (maintenance end
points) on the system.
33
P
L
L
L
L
L
L
L
L
819
Advertisement
Table of Contents
Troubleshooting
