Multicast Mvlan Group Delete Command; Multicast Mvlan Name Command; Multicast Mvlan Set Command; Multicast Mvlan Show Command - ZyXEL Communications MSC1024G Series User Manual

30.11.6 multicast mvlan group delete Command

Syntax:
multicast mvlan group delete <vid> <index>
This command removes the specified multicast VLAN group configuration.

30.11.7 multicast mvlan name Command

Syntax:
multicast mvlan name <vid> <name>
This command sets the name of the multicast VLAN. The following example sets the name of
the multicast VLAN (VID =10) to "
ras> multicast mvlan name 10 example

30.11.8 multicast mvlan set Command

Syntax:
multicast mvlan set <vid> <slot-port> fix|forbid
where
fix|forbid
This command sets a multicast VLAN and the allowed/blocked port member(s).
The following example creates a multicast VLAN (VID =10) and sets port 1 on the line card in
slot 3 to be a member of this multicast VLAN.
ras> multicast mvlan set 10 3-1 fix

30.11.9 multicast mvlan show Command

Syntax:
multicast mvlan show [vid]
This command displays the current multicast VLAN settings. In the state column, "-" indicates
the multicast VLAN is not active while "V" indicates the multicast VLAN is active.
ras> multicast mvlan show
idx vid state name
--- ---- ----- -------------------------------
1 10
2 12
ras>
MSC1000G/1024G/1224G Series User's Guide
example
Sets the port to be a permanent member of this multicast VLAN.
= fix:
forbid : Blocks the port from joining this multicast VLAN. The port will not
accept multicast traffic from this multicast VLAN.
V example
-
Chapter 30 multicast Commands
".
683