g723-vpi
g726-vpi
g729-vpi
This command creates and configures a DSP (Digital Signal Processing) profile. The default
profile "DEFVAL" has the following settings:
• Codec: G.711a, G.711µ
• Min-delay: 30 ms
• Max-delay: 120 ms
• Echo tail: 32ms
• Echo cancellation: on
• VAD: off
•
G.711 voice package interval
•
G.723 voice package interval
•
G.726 voice package interval
•
G.729 voice package interval
The following example shows a command configuring a DSP profile named "digsig4" with
the following settings:
• Codec: G.726 (40 bits), G.726 (32 bits), G.726 (16 bits).
• Min-delay: 30 ms
• Max-delay: 90 ms
• Echo tail: 32 ms
ras> profile voip dsp set digsig4 codec g726-40,g726-32,g726-16 playbuffer
30 90 echotail 32
32.18.4 profile voip dsp show Command
Syntax:
profile voip dsp show [<name>]
MSC1000G/1024G/1224G Series User's Guide
=
Set the G.723 voice package interval, 30 or 60 ms.
=
Set the G.726 voice package interval, 10, 20, 30 or 40 ms.
Set the G.729 voice package interval, 10, 20, 30, 40, 50 or 60 ms.
=
: 20
: 30
: 20
: 20
Chapter 32 profile Commands
805