ZyXEL Communications MSC1024G Series User Manual page 83

5 Set up termination names for the VOP card's ports.
Use the Port > VoIP H248 screen (see
• In the middle section of the screen, select the Slot in which you installed the H.248-
enabled VoIP line card (3 in this example).
• Select the Start and End Ports to configure (1 and 24 in this example).
• Enter the Termination name and Step (A301 and 1 in this example). This must
correspond with the information on the MGC.
• Click Apply.
Figure 29 Port > VoIP H248 Example
MSC1000G/1024G/1224G Series User's Guide
Section 11.25 on page 285).
Chapter 4 Tutorials
83