Link 7Day - ZyXEL Communications MSC1024G Series User Manual

The following table describes the labels in this screen.
Table 229 IMA Statistics: IMA Line Card: Group Detail: Link 96Q
LABEL
Start quarter
End quarter
Load
Refresh
collected interval
IV
OIF
SES(secs)
SESFE(secs)
UAS(secs)
UASFE(secs)
FC
FCFE(secs)
UUS(secs)
UUSFE(secs)
Stuff
Previous 10
Page X of X
Previous/Next
Page
Next 10

14.23.8 Link 7Day

To display the performance of an E1 link on the selected IMA group for the past 7 days, click
the slot number in the Statistics > IMA screen, the index number of the IMA group (see
Figure 311 on page
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Enter the starting quarter hour between 1 to 96.
Enter the ending quarter hour between 1 to 96. This ending quarter hours must be
equal to or grater than the starting quarter hours.
Click this to display the IMA group statistics collected during the specified period.
Click this to update this screen.
This field displays the queried interval (in week day, date, time and year format)
during which the following statistics were collected.
This is the total number of ICP Violations including the number of errored, invalid
or missing ICP cells, except during an SES (Severely Errored Seconds) or a UAS
(UnAvailable Seconds) condition.
OIF (Out of IMA Frame) is the occurrence of IMA anomalies.
This is the number of OIF anomalies, except during SES or UAS conditions.
This is the number of one-second intervals with greater than 30% of the ICP cells
counted as IV or one or more link defects (such as LOS (Loss Of Signal) or LOF
(Loss Of Frame)), LIF (Loss of IMA Frame defect), or LODS (Link Out of Delay
Synchronization defect) defects, except during UAS conditions.
This is the number of one-second intervals containing one or more RDI (Remote
Defect Indicator) defects, except during UASFE conditions.
This is unavailable seconds detected by the IMA line card.
This is unavailable seconds detected by the remote IMA device.
This is the number of link-layer transmission (Tx) or receiving (Rx) failures
detected by the IMA line card.
This is the number of link-layer transmission (Tx) or receiving (Rx) failures
detected by the remote IMA device.
This is the number of unusable seconds in the transmission (Tx) or receiving (Rx)
direction detected by the IMA line card.
This is the number of unusable seconds in the transmission (Tx) or receiving (Rx)
direction detected by the remote IMA device.
This is the number of stuff events the IMA line card has inserted on the link in the
transmission (Tx) or receiving (Rx) direction. Stuff events are inserted on a link
when the delay of the link is out of tolerance in the IMA group.
Click Previous 10 to show the preceding 10 pages of information.
This identifies which page of information is displayed and the total number of
pages of information.
Click one of these buttons to show the preceding/following screen if the
information cannot be displayed in one screen.
Click Next 10 to show the following 10 pages of alarms.
452) and then the number of a link and the Link 7Day tab.
Chapter 14 Statistics Screens
463