Cluster Member Show Command; Cluster Show Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 24 cluster Commands
where
<id>
<mac>
<password>
This command adds the specified cluster member to the cluster.
The following example adds a DSLAM as cluster member 4. The DSLAM's MAC address is
"00:13:49:d1:d0:cd" and its password is "1234".
ras> cluster member set 4 00:13:49:d1:d0:cd 1234

24.2.9 cluster member show Command

Syntax:
cluster member show
This command displays a list of the cluster members. ID 1 is the cluster manager.
The following is an example.
ras> cluster member show
member list:
id mac
-- -----------------
1 00:13:49:d1:d0:bc
2 -
3 -
4 -
5 -
6 -
7 -
8 -

24.2.10 cluster show Command

Syntax:
cluster show
This command displays status information about the cluster.
626
= An ID number (2~8) for the cluster member.
The hardware MAC address of the device
=
= The cluster member's management password. If the administrator
changes the device's management password afterwards, then it cannot
be managed from the cluster manager.
MSC1000G/1024G/1224G Series User's Guide