ZyXEL Communications MSC1024G Series User Manual page 696

Chapter 31 port Commands
Table 325 port Commands (continued)
COMMAND
shdsl alarmprof
pbo
pmms
set
show <slot>|<slot-
port>
[dsl|pvc|vlan
]
sip set
sip opmode
tel <slot-port>
<telephone-
no>
tlspvc delete
set
696
<slot-port>
span|stuc|stur|*
<alarmprofile>
<slot-port>
normal_epl|forced_
epl|forced_no_epl
<value>
<slot-port> <mode>
<slot-port>
<profile_name>
<slot-port> <sip-
profile> <svc-
profile> [<dsp-
profile>]
<slot-port>
<DEFVAL|v5sip>
<slot-port-vpi/
vci>
<slot-port-vpi/
vci> <profile>
llc|vcmux <vid>
<priority>
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Sets SHDSL ports or end point(s) to use an
alarm profile.
span : set alarm profile for the whole span
stuc : set alarm profile at stuc end point
: set alarm profile at stur end point
stur
: set alarm profile at both stuc and stur
*
Sets power backoff for SHDSL port(s).
normal_epl: Power backoff with EPL
(Estimated Power Loss).
forced_epl: Forced power backoff with
EPL.
: Forced power backoff
forced_no_epl
without EPL.
value: 0~31 in dB.
Sets the negotiated noise margin mode of
the SHDSL port(s).
The negotiated noise margin
mode:
mode, options are normal
Sets SHDSL port(s) to use a profile
created by the profile shdsl set
command.
Displays port settings.
slot: Specifies the slot of a line card (not
MSC's slot).
dsl: Displays a port's DSL settings.
pvc: Displays a port's PVC settings.
vlan: Displays a port's VLAN settings.
Sets a port on a VoIP line card to use the
specified SIP, SVC and DSP profiles.
sip-profile: SIP or dial plan profile
name (<=32 characters).
svc-profile: Call service profile name,
(<=32 characters).
dsp-profile: DSP profile name, (<=32
characters).
Use this command to specify the operation
mode of a VoIP port.
DEFVAL: configure the port to use SIP to
connect to a server.
v5sip: configure the port to use V5.2 to
connect to a traditional class 5 POTS
switch.
Records a port(s) subscriber's telephone
number.
Removes a TLS (Transparent LAN
Service) on the PVC.
Sets/changes TLS PVC settings.
P
M
M
M
or forced
M
L
M
M
M
M
M